~HONDA
~GL1200D'GLI200A
BULB REPLACEMENT
HEADLIGHT
Remove the headlight (Page 19-2).
Remove the headlight coupler and bulb cover.
Remove the headlight bulb.
Install a new headlight bulb.
CAUTION;
Do
not put finger prints on the headlight
bulb. they may create hot spots on the bulb.
If you touch the bulb with your bare hands,
clean it with
Q
cloth moistened with alcohol
to prevent its early failure.
Install the headlight in the reverse order of removal
(Page 19-3).
FRONT TURN SIGNALS
Remove the turn signal lens by removing screws.
Remove the bulbs from the base plates.
The installation sequence is the reverse order of
remova1.
CAUTION'
Be careful not
(0
overtighten the /eru mount-
ing screws to prevent cracking the lens.
L IGHTSISW ITC H ES/I NSTR UM ENTS
BULB COVER
Blue
19-7