Honda Gold Wing GL1200D Shop Manual page 269

r:::iJ\
HONDA
~GL1200DoGL1200A
Push the shock absorber onto the mounting stud at
the top and install the mounting bolts at the
bottom.
Position the travel trunk and saddlebag brackets or
handrail on the motorcycle.
Install the cap nuts on the mounting studs. Tighten
the nuts!bo[ts to the specified torque.
TORQUE:
Upper mount bolt:
30-40 N·m (3.0-4.0 kg-m, 22-29 ft-lb)
Right lower mount bolt:
20-25 N·m
(2.0~2.5
kg-m, 14-18 ft-Ib)
Left lower mount bolt:
65-75 N·m (6.5-7.5 kg-m, 47-54 ft-lb)
Connect the air hose to the 3·way joint.
TORQUE: 15-20 N·m (1.5-2.0 kg·m, 11-14
ft-lb)
Route the air hoses through the clamp on the rear
fender.
SUSPENSION
UPPER MOUNT NUT
...
-
~._
...
-
SHOCK LOWER SHOCK
ABSORBER ABSORBER
CLAMP
Install the 3·way joint into the frame.
Loosely install the elbow to the 3·way joint and
tighten elbow lock nut (GL1200A).
Connect the air hose to the elbow.
TORQUE: 8-12 N'm (0.8-1.2 kg-m, 6-9 ft-Ibl
ELBOW (GL1200A)
3-WAY JOINT
AIR HOSE
13-17