Honda Gold Wing GL1200D Shop Manual page 318

HYDRAULIC BRAKES
Disconnect the metal brake lines from the master
cylinder.
Disconnect the reservoir hose from the master
cylinder.
Remove the master cylinder.
DISASSEMBLY
CAUTION;
A pressure"control valve
is
incorporated in
the rear brake master cylinder. When filling
the master cylinder, use extreme care to
keep foreign matter from entering the
inside as it will affecr the perfomumce of
the control valve (except G type).
The pressure control valve cannot be dis-
assembled. Do not attempt to disassemble
the pressure control valve (except G type).
Remove the dust cover from the master cylinder.
Remove the circlip and pull the rod out of the
master cylinder body.
CAUTION;
Beware that the piston rod will pop out when
removing the eirelip.
15-12
r::iiJ\
HONDA
~GL1200D'GL1200A
RESER V a
'iRiHiO~S~Ei;;;::::'~'!"'''';O:::::l
METAL BRAKE LINES
MASTER CYLINDER
DUST COVER
CIRCLIP