Front Master Cylinder; Brake Disc Thickness; Brake Disc Warpage - Honda Gold Wing GL1200D Shop Manual

HYDRAULIC BRAKES
BRAKE DISC THICKNESS
Measure the thickness of each brake discs.
SERViCE LIMIT:
Front brake (GL 12000): 4.0 mm 10.16 in)
Front brake (GL 1200A): 9.0 mm 10.35 in)
Rear brake: 6.0 mm 10.24 in)
BRAKE DISC WARPAGE
Remove the wheel (front, page 12-31. (rear, page
12·9),
Remove the disc from the wheel.
Measure the brake disc warpage on a surface plate.
SERVICE LIMIT: 0.3 mm (0.01 inl
Reinstall the disc and wheel.
FRONT MASTER CYLINDER
DISASSEMBLY
~HONDA
~
Gl12000' Gl1200A
Drain brake fluid from the hydraulic system.
Disconnect the brake light switch wires.
Remove the brake lever and rear view mirror from
the master cylinder. Disconnect the brake hose.
BRAKE HOSE
OIL BOLT
MASTER CYLINDER
CAUTION:
Avoid spilling brake fluid
011
painted surfaces
or wind screen. Place
Q
rag over the painted
surfaces and wind screen whenever the brake
system is serviced.
NOTE:
When removing the oil hose bolt, cover the
end of the hose to prevent contamination.
Secure the hose to prevent fluid from leaking
out.
RemOl/e the master cylinder.
15-8
BRAKE LIGHT
SWI TCH WI RES
MASTER CYLINDER
HOLDER