Honda Gold Wing GL1200D Shop Manual page 356

~HONDA
~GL1200D'GL1200A
LIGHTS/SWITCHES/INSTRUMENTS
Remove the three screws and disconnect the beam
adjusting cable from the headlight.
Disconnect the headlight coupler and position light
wires and remove the headlight.
SCREWS
BEAM ADJUSTING CABLE
INSTALLATION
Connect the headlight coupler, position light wire
and beam adjusting cable to the headlight.
Install the headlight, trim holder bracket and
garnish bracket.
Install the headlight garnish.
Latch the windshiled trim into position by pushing
it
down on top.
MOUNTING BOLT$
LATCH
""-1'-
19-3