L.c.d. Meter; Input Voltage Inspection; Speed Sensor Inspection - Honda Gold Wing GL1200D Shop Manual

GiAHONDA
~GL1200DoGL1200A
Disconnect the coupler and remove the control
unit from the bracket.
L.C.D. METER
IG L1200AI
INPUT VOLTAGE INSPECTION
If the meter does not indicate any voltage. measure
voltage between the Black/Brown wire terminal
of the white 4-P coupler and body ground. Battery
voltage should be indicated.
SPEED SENSOR INSPECTION
LIGHTS/SWITCHES/INSTRUMENTS
Dj$connec~ the speed sensor from the speedometer
gearbox.
Connect a voltmeter across the Green/Black and
Black/Yellow terminals of the sensor white 3·P
coupler.
Turn the ignition switch to ON.
The sensor is normal if the voltmeter needle swings
from 0 to about 5V slowly eight times when the
sensor drive shaft is turned gradually one full turn.
GtBI
WHITE 3P COUPLER
BIIY
fi---
SPEED SENSOR
19-25