Cii!\HONDA
~
GL1200D·GL1200A
Push the pistons all the way in to allow installation
of new brake pads.
NOTE:
Check the brake fluid level in the brake
master cylinder reservoir as this operation
causes the level to rise.
Install the caliper on the caliper bracket so the
brake disc is positioned between the pads, making
sure not to damage the pads.
Apply Hi·Temperature silicone grease to the caliper
pivot bolt and insert the pivot bolt into the pivot
bolt hole.
Install the caliper bolt and tighten the caliper pivot
and caliper bolts to specified torCl!!e.
TORQUE:
Caliper pivot bolt:
25-30 N'm (2.5-3.0 kg·m, 18-22 ft-lb)
Caliper bolt and bracket lower mount bolt:
20-25 N'm (2.0-2.5 kg-m, 14-18 ft·lb)
Tighten the pad pin retainer bolt securel\,.
HYDRAULIC BRAKES
..
~
(SIliCONE GREASE)
15-7