Cylinder Head Removal - Honda Gold Wing GL1200D Shop Manual

CYLINDER HEAD/VALVE
CYLINDER HEAD REMOVAL
CAUTION:
Before removing the cylinder heads. drain the
co%nt(page
6-3).
Remove the intake pipe bolts, exhaust pipe nuts,
and coolant joint pipe bolts. Disconnect spark plug
wires and remove spark plugs.
Remove the muffler rear mounting bolts and
remove the exhaust system.
Ci!f\HONDA
~GL1200D'GL12DOA
COOLANT JOINT PIPE
EXHAUST PIPE INTAKE PIPES
Support the intake pipes with bungee cords.
Remove the cylinder head bolts, then remove the
cylinder head.
7-12
CYLINDER HEAD BOLT$