Engine Oil Level; Engine Oil & Filter Change - Honda Gold Wing GL1200D Shop Manual

~HONDA
~GL1200DoGL1200A
ENGINE OIL LEVEL
Start the engine and let
it
idle for a 2-3 minutes.
Stop the engine and put the motorcycle on its
center stand on level ground.
Remove the oil filler cap/dipstick, wipe
it
clean,
and insert the dipstick without screwing
it
in.
The oil level should be between the upper and
lower level marks on the dipstick. If required add
the recommended oil up to the upper level mark.
Reinstall the oil filler cap/dipstick and check there
are no oil leaks.
ENGINE OIL
&
FILTER CHANGE
NOTE'
Change engine oil with the engine warm and
the motorcycle on its center stand to assure
complete and rapid draining.
Stop the engine.
Remove the oil filler cap, drain plug, oil fitter bolt,
and oil filter cover.
LUBRICATiON
OIL FILLER CAP/DIPSTICK
-~~0~~
MARK
-~~~~~MARK
OIL FILTER BOLT
..~ ~
\lIi:----
OIL FILTER COVER
After draining the oil completely. check that the
drain plug sealing washer is in good condition and
install the plug.
Replace the oil filter. Check that the oil filter bolt
and cover O-rings are in good condition.
OIL FILTER BOLT
tf;:)
""
.
~
SPRING
OIL FILTER
WASHER
2-3