Rear Shock Absorber - Honda Gold Wing GL1200D Shop Manual

~HONDA
~GL12000'GL1200A
Inspect the a-rings for damage or deterioration.
Replace the O-rings if necessary.
Apply grease to the Q·rings and install the equalizer
onto the fork tubes.
Install the fork bridge onto the forks (Page 12-26).
Check for air leakage after assembly.
SUSPENSION
a-RINGS
O-RINGS~ ~
REAR SHOCK ABSORBER
REMOVAL
Place the motorcycle on its center stand.
Remove the side cover and seat.
Remove the travel trunk and saddlebags.
Disconnect the air hose and elbow from the 3·way
joint (G11200A).
Remove the 3·way joint from the frame.
Remove the air hoses from the hose clamp.
CLAMP AIR HOSES
13-13