Transmission Installation; Countershaft - Honda Gold Wing GL1200D Shop Manual

UHONDA
~GL1200D'GL1200A
TRANSMISSION/SHIFT LINKAGE
T
FRONT BEARING
DRIVER
07746-0020100
,
..
I
07746-0020100
07746-0020400
07746-0030100
07746-0030200
Rear bearing:
• Driver
• Attachment, 25 mm 1.0.
Drive a new bearing onto the mainshaft using driver
and attachment as follows:
Front bearing:
• Driver
• Attachment, 20 mm 1.0.
ATTACHMENT, 20 mm 1.0.
07746-0020400
REAR BEARING
After reassembling the mainshaft, measure the
assembled length to ensure proper alignment with
the case bearing set rings.
ASSEMBLY LENGTH: 177.4 mm
(6.9B
in)
TRANSMISSION INSTALLATION
COUNTERSHAFT
Install the countershaft and gears in the engine case.
Be sure the oil passage in the bearing cap is clean
and push it into position by hand.
Tighten the screws securely.
TORGUE: 8-12 N'm (0.8-1.2 kg-m. 6-9 ft·lb)
COUNTERSHAFT BEARING CAP
10-19