Do you have a question about the GoldWing GL1500 and is the answer not in the manual?
Questions and answers
Pedro Salgado Garcia
June 15, 2025
honda goldwing 1500 se del año 2000
no arranca si no muevo un poco la palanca de cambio, la luz de neutral si esta encendida
1 comments:
Mr. Anderson
August 19, 2025
The 2000 Honda Goldwing 1500 SE may not start unless the gear shift lever is moved, even though the neutral light is on, because the reverse lever safety switch may be faulty. This can prevent the starter circuit from engaging properly. Replacing the reverse lever safety switch is a known fix for this issue. Additionally, checking all fuses and electrical connections is recommended, as they can also cause starting problems.
This answer is automatically generated
Robert
May 18, 2025
Can the ride hight of a trike in the rear be raised , if the hight looks low.
1 comments:
Mr. Anderson
May 23, 2025
Yes, the rear ride height of a Honda GL1500 trike can be raised. The system allows for increasing or decreasing the height, and there is a control to adjust it. When increased, the rear slowly moves up, indicating it is working.
This answer is automatically generated
Wolf Lewis
March 9, 2025
I'm
Trying to take the chrome cover off my 2000 gl1500 front wheel to change the speed cable
1 comments:
Mr. Anderson
March 9, 2025
To remove the chrome cover from the front wheel of a 2000 Honda GoldWing GL1500 to change the speed cable, follow these steps:
1. Locate the Chrome Cover: The chrome cover is attached to the front wheel and covers the speed cable connection. 2. Remove Fasteners: Check for screws or bolts securing the cover. Remove them carefully using the appropriate tool. 3. Detach the Cover: Gently pull the chrome cover away from the wheel. It may have clips or tabs holding it in place. 4. Access the Speed Cable: Once the cover is removed, locate the speed cable connection for replacement or servicing. 5. Reassemble: After changing the speed cable, reattach the chrome cover by securing it with the removed screws or bolts.
Ensure all components are properly tightened and aligned before finishing the process.
This answer is automatically generated
Tim Lene
June 23, 2025
Fuel Cut off switch location on my 1996 Honda Goldwing Trike
Need help?
Do you have a question about the GoldWing GL1500 and is the answer not in the manual?
Questions and answers
honda goldwing 1500 se del año 2000 no arranca si no muevo un poco la palanca de cambio, la luz de neutral si esta encendida
The 2000 Honda Goldwing 1500 SE may not start unless the gear shift lever is moved, even though the neutral light is on, because the reverse lever safety switch may be faulty. This can prevent the starter circuit from engaging properly. Replacing the reverse lever safety switch is a known fix for this issue. Additionally, checking all fuses and electrical connections is recommended, as they can also cause starting problems.
This answer is automatically generated
Can the ride hight of a trike in the rear be raised , if the hight looks low.
Yes, the rear ride height of a Honda GL1500 trike can be raised. The system allows for increasing or decreasing the height, and there is a control to adjust it. When increased, the rear slowly moves up, indicating it is working.
This answer is automatically generated
I'm Trying to take the chrome cover off my 2000 gl1500 front wheel to change the speed cable
To remove the chrome cover from the front wheel of a 2000 Honda GoldWing GL1500 to change the speed cable, follow these steps:
1. Locate the Chrome Cover: The chrome cover is attached to the front wheel and covers the speed cable connection.
2. Remove Fasteners: Check for screws or bolts securing the cover. Remove them carefully using the appropriate tool.
3. Detach the Cover: Gently pull the chrome cover away from the wheel. It may have clips or tabs holding it in place.
4. Access the Speed Cable: Once the cover is removed, locate the speed cable connection for replacement or servicing.
5. Reassemble: After changing the speed cable, reattach the chrome cover by securing it with the removed screws or bolts.
Ensure all components are properly tightened and aligned before finishing the process.
This answer is automatically generated
Fuel Cut off switch location on my 1996 Honda Goldwing Trike