~HONDA
~
GL12000' GL1200A
Install the slave cylinder.
Connect the dutch hose with the oil bolt and the
two sealing washers.
TORQUE: 25-35 N'm 12.5-3.5 kg·m. 18-25 ft·lbl
Fill the dutch fluid reservoir and bleed the clutch
system.
CLUTCH DISASSEMBLY
Remove the slave cylinder from the clutch cover,
and remove the lifter rod.
NOTE:
Squeeze the clutch lever once and keep
it
in
this position by tying
it
to the handlebar grip
to prevent the slave cylinder piston from over
stroke caused by fluid gravity.
Remove the clutch cover.
Remove the gasket and dowel pins.
OIL BOLT
LIFTER ROD
SLAVE CYLINDER
CLUTCH COVER
CLUTCH
Remove the tifter plate by removing the six bolts.
LIFTER PLATE
8-9