03/06/03 13:01:19 32MCB600_113
BULB REPLACEMENT
Refer to the Safety Precautions on page
The light bulb becomes very hot while the
light is ON, and remain hot for a while after
it is turned OFF. Be sure to let it cool down
before servicing.
The lighting equipment is not legal for
highway use. Do not operate this
motorcycle on public streets, roads or
highways.
Do not put finger prints on the headlight
bulb, as they may create hot spots on the
bulb and cause it to break.
Wear clean gloves while replacing the bulb.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol
to prevent its early failure.
Be sure to turn the ignition switch OFF
62
.
when replacing the bulb.
Do not use bulbs other than that specified.
After installing a new bulb, check that the
light operates properly.
103