f?!\HONDA
~GL1200D'GLI200A
ALTERNATOR/STARTER CLUTCH/REAR ENGINE COVER
Compress the diaphragm springs with a press just
enough to remove the cotters.
CAUTION:
Support the alternator drive shaft assembly
at the shaft.
Ne~'er
support the bearing holder.
Remove the cotters, spring seat and three diaphragm
springs.
Remove the stell balf case and 10 steel balls.
NOTE:
Do not let the steel balls fall out of the ball
case during removal.
I nspeet the steel balls and inside of the steel ball
case for evidences of excessive or abnormal wear.
DAMPER SPRING COMPRESSOR
ATTACHMENT
\64-37~OOOO
COTTERS
STEEL BALL CASE
C1RCLIP
Pry off the circlip and remove the gear stopper and
driven gear,
Inspect the gear stopper for excessive or abnormal
wear on the boss and ball contacting surfaces.
•
GEAR STOPPER
DRIVEN GEAR
9-9