Ang Le Sensor - Honda Gold Wing GL1200D Shop Manual

LIGHTS/SWITCHESIINSTRUMENTS
ANG LE SENSOR
Remove the stem bottom cover and reinstall the
set screws.
Turn the front wheel from right to left and check
the angle sensor for wear or looseness.
If the sensor is worn, replace, and if it is loose,
tighten the mounting screws.
Remove the seat and top compertment.
Disconnect the brown control unit coupler.
Cii!\HONDA
~
GL12000' GL1200A
STEEFjING STEM
ANG LE SENSOR
BROWN COUPLER
BROWN 9P COUPLER
Turn the ignition switch to ON and push the turn _
signal switch to the LEFT position.
Connect the Blue/Black and BrownlWhite terminals
in the wire harness side connector with a jumper
wire.
If the switch returns to neutral (cancels) it is
normal.
Check the switch in the RIGHT position in the same
way.
Also check to see
if
the switch operates smoothly.
19-22
BulBI
"efW