Handlebars - Honda Gold Wing GL1200D Shop Manual

WHEEL/STEERING
HANDLEBARS
MASTER CYLINDER
r::iJ\
HONDA
~GL1200D'GL1200A
MASTER CYLINDER
HOLDER
REMOVAL
Disconnect the front brake light switch wires and
remove the master cylinder.
NOTE:
Do not loosen the brake hose unless neces-
sary.
After removing the master cylinder, keep
if
level. Do not
tilt
the master cylinder, or
turn it upside down to
prel'ent
air from
entering the brake hose.
Do not hong the master cylinder by the
brake hose.
Remove the right handlebar switch attaching screws.
Remove the clutch master cylinder holder.
Disconnect the choke cable from the choke lever.
Disconnect the clutch switch wires.
Remove the left handlebar switch by removing the
three screws.
BRAKE LIGHT
SWITCH WIRE
LEFT HANDLEBAR SWITCH
Remove the handlebar holder cover.
Remove the wire band from the handlebar.
12-16
SCREWS
SCREWS
CLUTCH SWITCH WIRES