Breather Hole Cleaning; Pinion Gear Assembly - Honda Gold Wing GL1200D Shop Manual

~HONDA
~GL1200D'GL1200A
Drive new pinion and ring gear bearings into the
case.
BREATHER HOLE CLEANING
Remove the breather hole cap and blow through the
breather hole with compressed air.
PINION GEAR ASSEMBLY
Install the original pinion gear spacer.
NOTE;
When the gear set, pinion bearing and/or gear
case has been replaced, use a 1.5 mm (0.06 in)
thick spacer.
FINAL DRIVE
DRIVER BEARING RACE INSERT
07749-0010000 ATIACHMENT Q7931-4630300
ATTACHMENT, 32 x 35 mm 07748-0010100
AND PILOT, 20 mm 07746-0040500
BREATHER HOLE BREATHER HOLE
PINION SPACER
PINION BEARING
14-9