Front Engine Cover Installation - Honda Gold Wing GL1200D Shop Manual

LUBRICATION
~HONDA
~GLI2000'GL1200A
Install the dowel pins on the pump body.
Install the outer rotor into the body with the
punch mark facing the outside.
Align the grooves in the inner rotor with the dowel
pin, and insert the inner rotor into the outer rotor.
DOWEL PINS
GROOVES
Install the oil pump cover and tighten the cover
screws and bolts.
TORQUE: 10-12 N·m (1.0-1.2 kg·m, 7-10 ft·lb)
BOLTS
-
at ,Iujj#
FRONT ENGINE COVER INSTALLATION '
Check that the neutral stopper arm is aligned with
the neutral cut'Qut in the stopper plate properly.
Check that the longer pin of the gearshift sensor is
aligned with the index mark on the sensor body.
2-10
NEUTRAL
STOPPER PLATE
LONGER PIN'