SUSPENSION
Remove the right fairing lower cover.
Disconnect the front and rear suspension air hoses
from the fairing.
Remove the 6 mm nut.
Remove the switch panel.
Remove the outlet air hose by removing the lock
nut.
Remove the selector valve by removing two screws.
-~-------------------_.
~HONDA
~GLI200D'GL1200A
"-I
6
mm
NUT
REAR SUSPENSION
AIR HOSE
SCREWS
Remove the right fairing pocket.
Pull the air pump/drier assembly and sensor joint
out from the fairing.
Disconnect the air hose from the sensor joint.
13-24
"
PUMP/DRIER
AIR HOSE
SENSOR JOINT