Brakelight Switch Adjustment; Bulb Replacement - Honda CBR 250R Manual

BRAKELIGHT SWITCH ADJUSTMENT

Refer to the Safety Precautions on page 45.
Check the operation of the "Rear Brakelight
Switch" (1) at the right side behind the
engine from time to time.
Adjustment is done by turning the "Adjusting
Nut" (2). Turn the nut in the direction
(A) if the switch operates too late and in
direction (B) if the switch operates too
soon.
(B)
(2)
(1) Rear Brakelight Switch
(2) Adjusting Nut
70
CBR 250R
(1)
(A)

BULB REPLACEMENT

Refer to the Safety Precautions on page 45.
The light bulb becomes very hot while the
light is ON, and remains hot for a while
after it is turned OFF. Be sure to let it cool
down before servicing.
Don't put finger on bulb, as they may create
hot spots on the bulb and cause it to break.
Wear clean gloves while replacing the bulb.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol
to prevent its early failure.
● Be sure to turn the ignition switch OFF
when replacing the bulb.
● Do not use bulbs other than those
specified.
● After installing a new bulb, check that
the light operates properly.
Honda Motorcycle & Scooter India Pvt. Ltd.