Honda Gold Wing GL1200D Shop Manual page 200

Ci!\aoNDA
~GL1200D'GL1200A
MAINSHAFT
Install the bearing set rings in the grooves of the
right engine case.
Install the primary driven gear onto the mainshaft.
Place the primary chain on the primary driven gear
by passing the mainshaft through the chain.
Engage the center shaft fork guide with the shift
drum groove with the claw engaged with the M2/M3
gear; install the mainshaft in the right engine case.
TRANSMISSION/SHIFT LINKAGE
M2/M3 GEAR
Align the locating tab of the mainshaft end cap with
the case groove, and reinstall the end cap.
Check that the bearing set rings are seated in the
bearing grooves securely.
Install the primary chain oiler.
MAINSHAFT
END CAP
GROOVE
10-21