Bulb Replacement - Honda NAVI K74G-CBS 2019 Owner's Manual

New automatic vehicle
Table of Contents

Advertisement

Install the fuse properly. A loose fuse
could cause damage to the electrical
system and even cause a fire.
5. Close the fuse box cover properly, after
replacing the fuse.
6. Install the battery cover.
If you do not have a replacement fuse with
the proper rating for the circuit, install one
with a lower rating.
NOTICE
Replacing a fuse with one that has a
higher rating greatly increases the chance
of damage to the electrical system.
If the replacement fuse of the same rating
burns out in a short time, there is probably
a serious electrical problem on your vehicle.
Leave the blown fuse in that circuit and
have your vehicle checked by your Honda
dealer.
58
NAVI

BULB REPLACEMENT

Refer to the Safety Precautions on page 38.
The light bulb becomes very hot while the
light is ON, and remain hot for a while after
it is turned OFF. Be sure to let it cool down
before servicing.
Be sure to turn the ignition switch OFF
when replacing the bulb.
Do not use bulbs other than those
specified.
After installing a new bulb, check that
the light operates properly.
Honda Motorcycle & Scooter India Pvt. Ltd.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents