Clutch Outer - Honda Gold Wing GL1200D Shop Manual

CLUTCH
Check for clutch plate warpage on a surface plate.
using a feeler gauge.
SERViCE LIMIT: 0.30 mm (0,012 in)
Check the clutch damper plate wave spring for
damage.
/
CLUTCH PLATE
~HONDA
~
GL1200D·GL1200A
CLUTCH
DAMPER PLATE
~~
~
~t
-
WAVE SPRING
Check the pressure plate and clutch outer for wear
or damage.
Check the slots in the clutch outer for nicks, cuts
and indentations made by the friction discs. If the
surfaces are not smooth or there is evidence of other
damage. replace the clutch outer.
CLUTCH OUTER
NOTE:
The clutch outer cannot be removed with
the engine in the frame. Refer to Section
5 for engine removal.
Remove the rear engine cover (Page 9-31.
Remove the spline washer from the clutch outer.
Pry the stopper ring off the mainshaft.
8-12
"- C .
-......'1
.....
_ ~
lIl":lr
CLUTCH OUTER
STOPPER RING
SPLINE WASHER