SUSPENSION
~HONDA
~GL1200D'GL1200A
UPPER MOUNT
NUT
TRAVEL TRUNK
BRACKET
~,:,,:::-I'''''
\
LOWER MOUNT
SADDLEBAG BRACKET
BOLT
3-WAY JOINT
NOTE:
Remove the saddlebag and travel trunk brackets.
Do not lay the shock absorber over on its side
or the fluid
will
run out the air hose.
Remove the lower shock absorber mounting bolt
and remove the shock absorber.
OIL SEAL REPLACEMENT
Disconnect the air hose from the 3-way joint.
Remove the air valve from the 3-way joint {GL-
1200DJ.
Remove the outlet air valve from the air outlet
hose on right side of fairing (GL1200A).
Remove Ihe boot.
~
AIR VALVE
-
AIR HOSE
BACK·UP PLATE
Remove the circlip and back-up plate.
-
CIRCLIP
13-14