Carburetor Disassembly; Vacuum Chamber Removal - Honda Gold Wing GL1200D Shop Manual

-
~HONDA
~GL1200D'GL1200A
Carefully separate the individual carburetors.
CAUTION:
The carburetor bores must stay parallel dun'ng
separation. If the carburetors are twisted, the
fuel or air joint pipes may be bent resulting
in fuel or air leakage.
NOTE:
Do not loosen the carburetor synchroniza-
tion adjusting screw.
CARBURETOR DISASSEMBLY
VACUUM CHAMBER REMOVAL
Remove the four vacuum chamber cover screws and
cover.
FUEL SYSTEM
FUEL JOINT PIPE
AIR JOINT PIPE AIR VENT
JOINT PIPE
VACUUM CHAMBER COVER
Remove the compre.$sion spring, diaphragm and
vacuum piston.
Inspect the vacuum piston for wear, nicks, scratches
or other damage. Check the diaphragm for deterio-
ration and tears. Make sure the piston moves up and
down freely in the carburetor.
DIAPHRAGMI
VACUUM PISTON _~SPRING