Alternator Drive Shaft Removal/Disassembly - Honda Gold Wing GL1200D Shop Manual

ALTERNATOR/STARTER CLUTCH/REAR ENGINE COVER
rAi%\HONDA
~GL1200D'GL1200A
'-'
Install the clutch outer on the rotor.
Apply locking agent to the threads and undersides
of the Torx Bolts, Install and tighten the Torx
bolts.
TOROUE: 23-27 N·m (2.3-2.7 kg-m. 17-20 ft-Ibl
Assemble the springs with the plungers; insert the
assemblies into the clutch outer.
Install the rollers into the clutch outer while press-
ing the plungers.
ALTERNATOR DRIVE SHAFT
REMOVAL/DISASSEMBLY
Unscrew the four bolts and remove the alternator
drive shaft assembly.
9-8
TORX DRIVER BIT (T40) 07703-0010100
OR EQUIVALENT TOOL
r~'~"
,~.=---
----~
~=:;=::_
. . • - , - , . -' _ _
-a;
~
-....,.;
STARTER CLUTCH OUTER
RQLLAR
.,....,"' "
PLANGER