Honda Gold Wing GL1200D Shop Manual page 142

a H O N D A
~
GL12000' GL1200A
Fill the de-foaming chambers with clean engine oiL
Install the chamber cover.
-\ ,
CYLINDER HEADIVALVE
DE·FOAMING
CHAMBER~
Apply sealant to the mating surfaces of the cylinder
head cover and sealing cover.
Apply sealant to the outer peripheries of the oil
seal and end cap on the ends of the camshaft.
Install the cylinder head cover.
Coat the rubber areas of the cover bois with oil and
torque the bolts.
TORQUE: 10-14 N·m (1.0-1.4 kg-m. 7-10 ft·lbl
Install the camshaft end cover.
Install the timing belt cover. Coat the rubber areas
of the cover bolts will oil and tighten the bolts.
TORQUE: 10-14 N·m (1.0-1.4 kg-m. 7-10 ft-Ib)
CYLINDER HEAD COVER
BOLTS
CAMSHAFT END COVER
7-31