Carburetor Separation - Honda Gold Wing GL1200D Shop Manual

~HONDA
~
GL 1200D' GL1200A
Remove the cover from the air chamber.
Loosen the hose clamps and remove the intake
pipes and rubber couplers from the carburetors.
CAUTION-
Do not
try
to remove the robber coup/en
from the in rake pipes. They are bonded in
place for precise alignment.
CARBURETOR SEPARATION
Remove the cotter pin, washers and plastic collar
from the linkage at No.3 or No.4 carburetor.
Disconnect the throttle link arm from the carbure-
tor.
Remove the cotter pin, washers and plastic washers
from the choke linkage rod at No. 1 or No.4 car·
buretor starter valve arm.
Disconnect the choke linkage rod from the starter
valve arm.
FUEL SYSTEM
THROTTLE LINK ARM
COTTER PIN
COTTER PIN
L
CHOKE LINKAGE ROD
4-5