Shift Fork/Shift Drum - Honda Gold Wing GL1200D Shop Manual

~HONDA
~GL1200D'GL1200A
SHIFT FORK/SHIFT DRUM
REMOVAL
Separate the engine case halves.
Remove the shift linkage (Page 10·3).
Remove the mainshaft (Page 10-12).
Remove the
shih
drum set plate.
Remove the shift fork lock bolt and lock washer.
TRANSMISSION/SHIFT LINKAGE
Pull the shift fork shaft out of the engine case while
taking out the shift forks.
Remove the shift drum.
INSPECTION
Inspect the sh itt fork guide pins for wear or damage.
Measure the shift fork claw thickness.
SERViCE LIMIT: 6.1 mm (0.24 in)
Measure the shift fork I.D.
SERVICE LIMITS:
"L" and
"e"
forks: 13.04 mm (0,513 in)
"R" fork: 13.05 mm (O.514 in)
j
I
SHIFT FORKS
SHIFT FORK SHAFT
GUIDE PIN
10-11