Honda Gold Wing GL1200D Shop Manual page 75

FUEL SYSTEM
BAND SCREWS
~HONDA
~GL1200D'GL1200A
SEAL RUBBER
Loosen the band screws and remolle the right side
intake manifolds from the carburetors.
Remove the four intake manifold seal rubbers.
Check the seal rubbers for damage or deteriorations.
NOTE'
Seal the cylinder head inlet ports with tape or
a clean cloth the keep dirt and debris from
entering the intake ports.
Place a shop towel over the left cylinder head to
prevent the cylinder head cover from damage.
Move the carburetors and air chamber as an as-
sembly to the left side and disconnect the throttle
cables.
Loosen the choke cable clamp screw and disconnect
the choke cable from the choke linkage.
4-4
THROTILE CABLES
•
CHOKE CABLE