CYLINDER HEAD!VALVE
Install the orifice plate aligning the lug on the plate
with the cutout in the camshaft holder.
~HONDA
~GL1200D'GL1200A ~
ORIFICE PLATE
Coat the camshaft journals and cam lobes with
molybdenum disulfide grease.
Install the oil seal and cap on the end of the cam·
shaft.
Coat the outer peripheries of the oil seal and end
cap with sealant, and install the camshaft in the
cylinder head.
Aling the keyway in the camshaft with the upper
mating surface of the cylinder head.
KEY WAY
OIL SEAL
•
CAMSHAFT
.-
~
.
END CAP
I nstall the camshaft holder and tighten the five bolts
shown in a crisscross pattern in 2-3 steps.
TORQUE: 18-22 N'm (1.8-2.2 kg·m,
13-16
ft·lb)
7-24
CAMSHAFT HOLDER DOWEL BOLTS
CAMSHAFT HOLDER BOLTS