~HONDA
~GL1200D'GL1200A
Lubricate the retainer with grease.
Install the speedometer gear retainer into the wheel
hub.
NOTE:
Align the tabs on the retainer with groove in
the hub.
Install the dust seal into the hub.
WHEEL/STEERING
GROOVES
Coat the dust seal lip with molybdenum disulfide
grease.
I nstall the dust seal and collar into the hub.
CAUTION:
RemOl'e all the grellse from Ql'Qund the out-
side of the dust seal.
Install the discs, disc bolts and nuts.
TORQUE: 27-33 N·m (2.7-3.3 kg-m, 20-24 ft·lb)
Coat the dust seal lip with molybdenum disulfide
grease.
lubricate the speedometer gear with grease.
Install the speedometer gear box in the wheel hub,
aligning the gear box notches with the tangs in the
retainer.
CAUTION:
Remove all the grease around the outside of
the oil seal.
~IMOLYBOENUM
•
DISULFIDE GREASE)
TANGS
12-7