Bulb Replacement - Honda Dream DX CD110 Owner's Manual

BULB REPLACEMENT

Refer to the Safety Precautions on page 34.
The light bulb becomes very hot while the
light is ON, and remains hot for a while
after it is turned OFF. Be sure to let it cool
down before servicing.
Do not put finger prints on the headlight
bulb, as they may create hot spots on the
bulb and cause it to break.
Wear clean gloves while replacing the bulb.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol
to prevent its early failure.
• Be sure to turn the ignition switch OFF
when replacing the bulb.
• Do not use bulbs other than those
specified.
• After installing a new bulb, check that
the light operates properly.
60
CD110 Dream DX
POSITION LIGHT BULB
Refer to the Safety Precautions on page 34.
1. Remove the "Front Cowl" (1) mounting
"Screws" (2) - 3 nos.
2. Remove the front cowl carefully by
holding it from the lower end.
3. Disconnect the "Headlight Connector"
(3).
4. Pull out the "Position Light Bulb" (4) out
of the head light unit and remove the
bulb from its holder.
5. Install a new bulb in reverse order of
removal
(2)
(1)
(2)
(1) Front Cowl
(2) Screws
Headlight Connector
(3)
(4) Position Light Bulb
Honda Motorcycle & Scooter India Pvt. Ltd.
(2)
(4)
(3)