TRANSMISSION/SHIFT LINKAGE
r:;;;j\
HONDA
~GL1200D'GL1200A ~
TRANSMISSION ASSEMBLY
GEAR BUSHING
Clean all removed parts in solvent and dip them in
clean engine oil before they can be reassembled.
NOTE:
Align the oil holes in the gear bushings
with the oil holes in the shafts.
Install the circlips with the end gap aligned
with the shaft spline as shown. Note the
installation direction.
OIL HOLES
OUTPUT GEAR
MAINSHAFT (14Tl
M4 GEAR (32Tl
\
M2/M3 GEAR
(24T128Tl
C3 GEL3ST}
~\')
~~
\Th~
\
M5 GEAR (35T)
10-18