Cylinder Head Assembly - Honda Gold Wing GL1200D Shop Manual

CYLINDER HEADNALVE
CYLINDER HEAD ASSEMBLY
Install the spring seats.
Install a new valve stem seal on each valve guide.
Lubricate each valve stem with a solution of one
part molybdenum disulfide grease and two part
engine oil.
Install the valves, then slip inner and outer springs
over valve stems and install valve spring retainers
and keepers.
The spring tightly wound coils should face in
toward the cylinder head.
CAUTION;
To prevent loss of tel/sion, do riot compress
rhe I'oll'e spn"ng more
l11QJl
necessary.
a
HONDA
~GL1200D'GL1200A
VALVE SEALS
SPRING SEATS
VALVE SPRING COMPRESSOR
07757-0010000
THESE ENDS TOWAD
CYLINDER HEAD
Tap the top of each valve with a plastic hammer to
seat the keepers.
NOTE:
To prevent bending valves, stand the cylinder
head on its end when tapping them.
7-20