FINAL DRIVE
Apply gear oil to the oil seal lip contact surface of
the pinion joint and install the pinion joint.
Install the pinion joint holder and pinion joint
holder attachment. Tighten the pinion joint nut.
TORQUE:
100-120 N'm (10.0-12.0 kg-m, 72-87 ft·lb)
Remove the tools.
Make sure that the gear assembly rotates smoothly
without binding by turning the pinion joint.
GEAR ASSEMBLY PRELOAD:
0.2-0.4 N·m (2-4 kg-em, 1.7-3.5 in·lb)
Install the dust guard plate and torque the bolt.
Install the distance collar.
14-16
~HONDA
~GL1200D'GL1200A
PINION JOINT HOLDER
07924-M E40QOQ
'01'" .
If
h
e..
At))
PINION JONT HOLDER ATTACHMENT
07924-9690100
DUST GUARD PLATE
DISTANCE COLLAR