Honda Gold Wing GL1200D Shop Manual page 325

rA1\HONDA
~GL1200D'GL1200A
HYDRAULIC BRAKES
FRONT CALIPER BRACKET REMOVAL
Remove the caliper without disconnecting the brake
hose (Page 15-5).
Remove the caliper bracket by removing upper and
lower mount bolts.
Inspect the condition of the caliper pivot bolt
boot.
UPPER MOUNT SOLT
,
CALIPER
BRACKET
15-19
.
,
.
LOWER MOUNT
BOLT
-
PIVOT COLLAR
PIVOT BOOT
O·RING
PAD SPRING
~ MOLYBDENUM
- QISULFIDE GREASE
UPPER MOUNT BOLT
Install the caliper bracket onto the fork leg.
Install the pivot boot and pad spring.
Loosely install the upper and lower mount bolt.
then torque the upper mount bolt.
TORQUE: 30-40 N·m (3.0-4.0 kg-m, 22-29
ft-Ibl
Install the caliper assembly onto the caliper bracket
(Page 15·7).
CAUTION:
Note the caliper bracket bridge installation
direction. Face the m/lrk "B" toward the
inside and install the lower mount bolt
through the hole of the caliper bracket
bridge.
~~I
~\
j
LOWER MOUNT "6" MARK OFFSET
BOLT HOLE
Coat the outer side of the caliper bracket pivot
collar with molybdenum disulfide grease.
INSTALLATION
Inspect the O-rings for damage or deterioration.