Honda Gold Wing GL1200D Shop Manual page 66

QHONDA
®GLI2000'GLI200A
Check the front fork air pressure when the forks are
cold.
Place the motorcycle on its center stand.
Remove each air valve cap and measure the air
pressure.
Inspect the air pressure by the on-board air pressure
gauge in the instrument panel (GL1200A).
AIR PRESSURE:
0-40 kPa (O-O.4 kg/cm
1
•
0-6 psi)
NOTE:
Some pressure will be lost when checking
pressure (except GL 1200A). Determine the
amount of loss and compensate accordingly.
REAR
Place the motorcycle on its center stand.
Check the swing arm for damage.
Move the rear wheel sideways with force to see
if
the swing arm bearings are worn. Replace the bear-
ings if there is any looseness.
Check the shock abosrbers for leak or damage.
Inspect the air hoses for deterioration and cracks.
Replace parts as required.
Tighten all nuts and bolts.
Remove the air vaille cap and inspect the air pres-
sure.
Inspect the air pressure by the on-board air pressure
gauge in the instrument panel (GL 1200A).
AIR PRESSURE:
200-400 kPa (2.0-4.0 kg/cm
2
.28-57 psi)
NOTE:
Some pressure will be lost when checking
pressure (except GL1200A). Determine the
amount of loss and compensate accordingly.
MAINTENANCE
AIR HOSES
,
AIR VALVE CAP
3-19