Honda Gold Wing GL1200D Shop Manual page 141

CYLINDER HEADNALVE
Inspect each hydraulic tappet adjuster for presence
of air by compressing it with fingers.
Bleed air from the adjuster if it is compressed by
more than 0.30 mm (0.012 in) (Page 7-11).
CAUTION'
To prel'em entry of air, do not rilt the
adjusters ollce they are filled with oil or
kerosene.
Slide the exhaust valve tappet adjusters into the
camshaft holder with the oil holes facing up.
Install the cap on each intake valve tappet adjust-
er. and slide
it
into position in the camshaft holder
with the cap facing up.
c:i!\HONDA
~GL1200D'GL1200A ~
EXHAUST TAPPET ADJUSTER
"
.
...... t..
CAP
INTAKE TAPPET
ADJUSTER
Install the shims and stopper plugs.
TORQUE; 23-27 N·m (2.3-2.7 kg-m. 17-20 ft-Ibl
7-30
SHIM/STOPPER PLUGS