Gearshift Linkage Disassembly; Shift Drum Linkage; Shift Arm/Spindle - Honda Gold Wing GL1200D Shop Manual

GEARSHIFT LINKAGE DISASSEMBLY
SHIFT DRUM LINKAGE
Remove the front engine cover (Page 2·4).
Unscrew the 6 mm nut and remove the stopper arm,
neutral stopper arm and spring.
Inspect the spring for 105s of tension.
Check the stopper arm for excessive or abnormal
wear or damage.
Remove the two 6 rnm bolts and disassemble the
shift drum stopper.
Inspect the stopper plate for excessive or abnormal
wear or damage.
SHIFT ARM/SPINDLE
Separate the engine cases (Page to-9).
Remove the gearshift peda1.
Straighten the tab of the lock washer and remove
the shift arm and spindle from the left engine case
by removing the lock bolt.
TRANSMISSION/SHIFT LINKAGE
LOCK WASHER
10-3