Oil Pressure Warning Switch; Brake Switches - Honda Gold Wing GL1200D Shop Manual

LIGHTS/SWITCHES/INSTRUMENTS
Oil PRESSUR WARNING SWITCH
Disconnect the wires from the oil pressure
switch.
Turn the ignition switch on, and ground the wire
terminal to the body ground.
The warning indicator comes on
if
system is normal.
Inspect the indicator bulb or connector for faulty
or loose.
Measure the oil pressure
if
warning indicator system
is normaly.
Replace the oil pressure switch if warning indicator
system and oil pressure are normaly.
r::iff\
HONDA
~GL1200D'GL1200A
SWITCH WIRE
GROUND
Apply a liquid sealant to the switch threads.
Install and tighten the switch.
TORQUE; 10-14 N'm (1.0-1.4 kg,m, 7-10 ft-Ib)
CAUTION:
Be CtJreful not to overtighten the switch
to
prevent damaging the threads of the engine
cover.
Connect the switch wire to the switch.
Install the rubber cover onto the switch.
Oil PRESSURE SWITCH SWITCH WIRE
REAR BRAKE LIGHT
SWITCH WIRE COUPLER
BRAKE SWITCHES
V/'""'"
Check the rear brake light switch for continuity
with the rear brake applied.
Check the front brake light switch for continuity
with the front brake applied.
FRONT BRAKE LIGHT
SWITCH TERMINALS
19-10