STARTER SYSTEM
Inspect the gears for worn or damage.
ASSEMBLY/INSPECTION
Lubricate the gears with grease.
Align the
groolle
on the gear with dowel pin on the
cover when installing the gear case cover.
Install the armature in the case, being careful not
to damage the brushes.
~HONDA
~
GL1200D·GL1200A
_
~GEAAS
•
DOWEL PIN
GROOVE
Install the starter motor case align the index marks
on the case with the index marks on the cover,
Apply engine oil to the new O·riog.
Install the starter motor into the engine case, sliding
the drive splines into the splines of the drive
sprocket, then install the mounting bolts.
Install the rear engine cover.
Reconnect the batlery cables at both ends.
With the engine stop switch off. test the starter for
proper operation before engine installation.
18-4
INDEX MARKS
STARTER MOTOR
DRIVE SPROCKET