Honda Gold Wing GL1200D Shop Manual page 324

HYDRAULIC BRAKES
~HONDA
~GL1200D'GL1200A
'>..I
CYLINDER INSPECTION
Check the caliper cylinder bore for scoring,
scratches or other faults. Measure the caliper
cylinder bore.
SERVICE LIMITS; 32.090 mm (1.2634 in)
Right front caliper (ellcept G type):
25.460 rnm 11.0024 in)
Hose oil bolt:
Caliper bolt:
TORQUE:
Caliper pivot bolt:
OIL BOLT CALIPER
BOLT
CALIPER
BOLT
COLLAR BOOTS SLIDE COLLAR
rr-,·
.~l
OIL
BOLT
DUST SEALS
BRACKET LOWER
MOUNT BOLT
PISTON SEALS
PISTONS
PIVOT
BOLT
25-30 N·m
(2.0-3.0 kg·m, 18-22 ft·lb)
20-25 N'm
(2.0-2.5 kg-m, 14-18 ft-Ib)
25-35 N·m
(2.5-3.5 kg·m, 18-25 ft-Ib)
Caliper bracket lower mount bolt:
20-25 N'm (2.0-2.5 kg·m, 14-18 ft-Ib)
Install the pad spring and pads.
INSTALLATION
ASSEMBLY
Coat the outer side of the slide collar with Hi-
Temperature silicone grease.
Install the pistons with the dished ends toward the
pads.
The piston and dust seals must be replaced with
new ones whenver they are removed. Coat the
seals with silicone grease or brake fluid before
assembly.
Install the caliper on the caliper bracket (Page 15·7).
Connect the oll hose to the caliper with the oil bolt
and its two sealing washers.
Tighten the bolts to specified torque.
Install the collar boots and collar making sure that
the hoots are seated in the collar and caliper grooves
properly.
15-18