Front Master Cylinder - Honda CBR125R Owner's Manual

Measure the brake discs warpage using a dial indi-
cator.
SERVICE LIMITS:
FRONT: 0.10 mm (0.004 in)
REAR:
Check the wheel bearings for excessive play, if the
warpage exceeds the service limit.
Replace the brake disc if the wheel bearings are nor-
mal.

FRONT MASTER CYLINDER

REMOVAL
Drain the brake fluid from the hydraulic system
(page 15-5).
Remove the right rearview mirror.
Remove the brake hose oil bolt, sealing washers
When removing the
and brake hose eyelet.
oil bolt, cover the
end of the brake
Disconnect the brake light switch connectors.
hose to prevent
contamination.
Remove the bolts, holder and master cylinder.
DISASSEMBLY
Remove the brake lever pivot nut, bolt and brake
lever.
0.10 mm (0.004 in)
HYDRAULIC BRAKE
SEALING WASHERS
REARVIEW MIRROR
BOLTS
PIVOT BOLT
BRAKE LEVER
OIL BOLT
CONNECTORS
MASTER CYLINDER
HOLDER
PIVOT NUT
15-11