Errors Requiring a Restart
Errors requiring a restart are fatal to the operation of the printer. The power to
the printer must be switched off and the printer must be restarted. They are
caused by an obstruction to the printer drive or damage related to a printer
board.
When an error requiring restart occurs, the printer behaves as follows.
(a) Drive power is shut down automatically.
(b)All LEDs on the control panel flash and the beeper sounds continu-
ously. The beeper will not stop until a key is pressed.
(c) An error code and error name are displayed in the liquid crystal dis-
play section.
Errors Requiring Restart that Involve the Mechanical System
If an error has occurred in the mechanical system, remove the foreign object,
paper scraps, etc. that are causing the obstruction and restart the printer.
Feed motor error
E 0 6 5 E r r
X
Carriage motor error
E 0 6 6 E r r
Y
Feed encoder error
E 0 6 9 E r r
X e n c o d e r
Carriage encoder error
E 0 7 0 E r r
Y e n c o d e r
Feed imposition timeout
E 0 7 1 E r r
X t i m e o u t
Carriage imposition timeout
E 0 7 2 E r r
Y t i m e o u t
180
An error with the media feed motor has
M o t o r
occurred.
An error with the carriage motor has
M o t o r
occurred.
An error with the media feed encoder
has occurred.
An error with the carriage encoder has
occurred.
An error with the media feed imposi-
tion has occurred.
An error with the carriage imposition
has occurred.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)