Operations In Self-Diagnosis Mode; Operating Self-Diagnosis Mode - MUTOH ValueJet VJ-1324 Maintenance Manual

5.3 Operations in Self-Diagnosis Mode

5.3 Operations in Self-Diagnosis Mode
This section explains how to operate in the self-diagnosis mode as well as providing the list of available
diagnosis items.
5.3.1

Operating Self-Diagnosis Mode

Follow the flow shown below to operate the self-diagnosis mode.
T I P
For more detailed operation procedure, refer to the flow chart of the applicable diagnosis
items.
1. Press [<] key or [>] key on Operation panel to select the
item to be diagnosed, and press [Enter] key.
• The selected item is accepted.
• If the item has a sub menu, the sub menu is displayed.
2. When the LCD monitor on Operation panel indicates a
setting value, the value can be modified.
Press [Setting/value +] key or [Setting/value -] key on
Operation panel to modify the value.
5.3.1 Operating Self-Diagnosis Mode
3. To save the modified value, press [Enter] key on Operation
panel.
*The modified set value is stored and the next item is
displayed.
NOTE
If you press [Cancel] key, or, [Setting/value +] key or
[Setting/value -] key, instead of [Enter] key, the
modification is not stored.
4. To quit the diagnosis, press [Cancel] key on Operation
panel.
*The system returns to an upper hierarchy of the diagnosis
menu.
5. To exit the self-diagnosis menu, press [Power] key.
VJ1324E-M-02
P.5-4