Self-Diagnosis Function Mode; Startup; Platen Adjustment; Test - MUTOH XpertJet XPJ-1641SR Training Manual

12. Engineer Maintenance

12.6. Self-Diagnosis Function Mode (1/7)

cf. Maintenance Manual (XPJ-1641SR:Rev.00-5.2.8./XPJ-1682SR:Rev.00-5.2.8.)
Startup to Self diagnosis mode

Startup

Step.1: While tapping ・ ・
Step.2: Do so until LED blinks.
Step.3: Release power key when LED blinks.
Step.4: Hold ・ ・ until self diagnosis mode appears.
Operation does not proceed unless the power key is released.
CSTM-XPJ16xxSR(E)_1.00
simultaneously, tap power key.
cf. Maintenance Manual (XPJ-1641SR:Rev.00-5.4./XPJ-1682SR:Rev.00-5.4.)
Check.1: Platen Adjustment
Check 1: Adj. Platen
cf. Maintenance Manual (XPJ-1641SR:Rev.00-5.5./XPJ-1682SR:Rev.00-5.5.)
Check.2: Test
Check 2: Test
Submenus
Page. 138
Before performing the mechanical adjustment on the
platen, use this menu to set the pre heater
temperature to 47℃ and the platen heater
temperature to 42 ℃, and warm up.
Test 1: Ram Capacity Test 2: Version
Test 3: Panel Test 4: Sensor
Test 5: Encoder Test 6: Fan
Test 7: Record Test 8: Head Signal
Test 9: Time Check
To Table of Contents
CONFIDENTIAL