Ignition Coil; Ignition Timing - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
CKP SENSOR
REPLACEMENT
Remove the right crankcase cover (page 9-5).
Remove the wire grommet from the cover.
Remove the bolts and CKP sensor.
Install the new CKP sensor and tighten the mount-
ing bolts securely.
Route the CKP sensor wire into the groove of the
right crankcase cover.
Apply sealant to the grommet seating surface and
install the grommet into the cover groove properly.
Install the right crankcase cover (page 9-25).

IGNITION COIL

REMOVAL/INSTALLATION
Lift up fuel tank (page 3-5).
Disconnect the spark plug caps from the spark plugs
(page 3-8).
Disconnect the ignition coil primary wires from the
ignition coil.
Remove the bolts and ignition coil.
Route the spark
Installation is in the reverse order of removal.
plug wires properly
(page 1-24).

IGNITION TIMING

Warm up the engine.
Stop the engine and remove the timing hole cap.
email: info@motomatrix.co.uk
IGNITION SYSTEM
CKP SENSOR
BOLTS
PRIMARY WIRES
BOLTS
GROMMET
IGNITION COIL
TIMING HOLE CAP
18-7