Mazda CX-7 2007 Workshop Manual page 1673

FRONT FOG LIGHT BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Slightly bend back the mudguard.
3. Disconnect the front fog light bulb connector and
remove the front fog light bulb by turning it in the
direction of the arrow.
Caution
• A halogen bulb generates extremely high
heat when it is illuminated. If the surface
of the bulb is soiled, excessive heat will
build up and the life of the bulb will be
shortened. When handling the bulb, hold
the flange, not the glass.
4. Install in the reverse order of removal.
End Of Sie
WM: REAR COMBINATION LIGHT
REAR COMBINATION LIGHT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the service hole cover.
3. Remove in the order indicated in the table.
1 Connector
2 Nut
3 Rear combination light
4. Install in the reverse order of removal.
End Of Sie
LIGHTING SYSTEMS
.
FRONT FOG
CONNECTOR
LIGHT BULB
FRONT FOG LIGHT BULB
LH RH
4.1—6.1 N·m
2
{42—62 kgf·cm, 37—53 in·lbf}
1
3
09-18–11
id091800802300
acxuuw00001720
09-18
id091800801000
acxuuw00001722
acxuuw00001723